1. Home/
  2. AC and Heating Equipment/
  3. Split System-Ducted/
  4. HVAC Systems/
  5. Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 49k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 14.5 SEER2
  View Compare ( 0 )
Catalog pricing shown. Please Sign In to see your pricing.

Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 49k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 14.5 SEER2

Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 49k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 14.5 SEER2
View Inventory
Kit Includes PVC Ptrap Kit, BIP Gas Cock, Electrical Box, Switch, Receptical & Duplex Cover, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, whip 6' 3/4" 8GA, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat
Add to Cart
Regional Add to Job List

This retail set contains

Add to Cart
Regional Add to Job List
Vendor Name:
Arcoaire
URI Part Number:
Arcoaire AC Single Phase Split System Deluxe Single Stg 3.5 Ton 49k BTU Coil 97Pct Low Nox Gas Furnace 060 MBH 14.5 SEER2
Shipping Weight (Lbs.):
200
Energy Star:
Not Energy Star Compliant
Heating Input (BTUH):
060 MBH Heat
Includes:
H4A6S42AKAWA, F97CMN0602120A, EVD4X49M24A, ACGKIT5
Nominal Capacity (BTUH):
42000
Cooling Efficiency (EER2):
12
Cooling Efficiency (SEER2):
14.5
System Indoor Type:
Low Nox Gas Furnace
System Outdoor Type:
Single Stage
System Coil Configuration:
Vertical Power "V"
Furnace Efficiency:
97
System Nominal Tons:
3.5 Ton
AHRI System Number:
208047165
A/C, Single Phase, Split Gas Furnace Single Stage, Vertical Power "V" H4A6S/F97CMN/EVD4X

Air Conditioner Condenser
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80ESL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride igniter
  • One piece prepainted steel cabinet
  • In-shot burners
  • 33 1/3” (847mm) high, for ease of installation
  • Quarter turn knobs for easy door removal and secure attachment
  • Factory shipped for natural gas, convertible to propane with accessory kit
  • Four position - upflow/downflow/horizontal (left/right) installation
  • Three position inducer elbow capability
  • Through the casing flue pipe for counterflow applications
  • Common venting with other Category I appliances
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly

Gas Furnace

  • ECM blower motor
  • Low NOx units designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Single stage heating operation
  • First capacity applies to upflow position
  • Second capacity applies to downflow/horizontal positions
  • 24 VAC and 115 VAC humidifier terminal
Evaporator Coil
  • Corrosion Resistant Aluminum
  • Low Pressure Drop
  • TXV metering device factory installed
  • Compact design, shorter than A-coils
  • Hemmed flanges for safer handling
  • Cabinets meet or exceed 2% air leakage codes
  • UV knockout
  • No delta plate allows easy cleaning
  • 30-40% Lighter than “A” Coils
  • 80% Fewer Factory Braze Joints vs. “N” Coils
  • V Design Reduces Cabinet Sweating
  • Helium leak tested @ the factory